Halter for ThinLine Grazing Muzzle

(28 customer reviews)

$45.00

This  Halter is designed for use with the Flexible Filly Grazing Muzzle.

PLEASE NOTE:  THIS IS HALTER ONLY – Flexible Filly grazing muzzle and accessories are SOLD SEPARATELY

Designed for comfort, The grazing muzzle halter has features to make using and installing the Flexible Filly Muzzle easy. Our muzzle horse halter has strategically placed “keepers” for you to attached your muzzle.  These keepers ensure your grazing muzzle is secured in the right position while also remaining clear of horses’ lips and nostrils.

The turnout halter is designed for a comfortable and secure fit. It features specially designed slots, allowing you to thread the muzzle holder ties throughout the halter so your horse experiences rub-free muzzle grazing!  The two buckle crown holds the leather breakaway and provides you with the adjustability ensuring a perfect fit.

Available in four sizes; pony, cob, horse, and draft.

Leather breakaway crowns.

Stainless Steel buckles and rings.

Black nylon with white stitching.

Note: Halters tend to run large – see dimensions below.  If your horse is on the cusp of  a size – we recommend to go down on size.

These measurements can be compared against a well-fitting halter to determine which size will be the best fit for your horse. Measurements are of the webbing only, they do not include the halter hardware.

Size Noseband Chin x 2 Cheek Throatlatch Breakaway Crown
Medium Mini     8”    3.5″ 4” 12” 17.75”
Pony    10.25”   5.50” 7″ 17” 22”
Cob    11”   6” 7.5” 18.5” 22”
Horse   12”   6.25” 8” 20” 23”
Oversize   12.5”    6.75” 8” 21.5” 23”

Description

This Horse Halter is designed for use with the Flexible Filly Grazing Muzzle.   –

PLEASE NOTE:  THIS IS HALTER ONLY – Flexible Filly grazing muzzle and accessories are SOLD SEPARATELY

This halter is NOT required to use the Flexible Filly Muzzle, you can use a generic breakaway halter.

Designed for comfort, The grazing muzzle halter has features to make using and installing the Flexible Filly Muzzle easy. Our muzzle horse halter has strategically placed “keepers” for you to attached your muzzle.  These keepers ensure your grazing muzzle is secured in the right position while also remaining clear of horses’ lips and nostrils.

The turnout halter is designed for a comfortable and secure fit. It features specially designed slots, allowing you to thread the muzzle holder ties throughout the halter so your horse experiences rub-free muzzle grazing!  The two buckle crown holds the leather breakaway and provides you with the adjustability ensuring a perfect fit.

This special halter is designed to enhance the use of the muzzle and eliminate concerns of rubs from the muzzle ties.

Note: Halters tend to run large – see dimensions below.  If your horse is on the cusp of  a size – we recommend to go down on size.

 

Available in four sizes; pony, cob, horse, and draft.

Leather breakaway crowns.

Stainless Steel buckles and rings.

Black nylon with white stitching.

 

These measurements can be compared against a well-fitting halter to determine which size will be the best fit for your horse. Measurements are of the webbing only, they do not include the halter hardware.

Size Noseband Chin x 2 Cheek Throatlatch Breakaway Crown
Medium Mini     8”    3.5″ 4” 12” 17.75”
Pony    10.25”   5.50” 7″ 17” 22”
Cob    11”   6” 7.5” 18.5” 22”
Horse   12”   6.25” 8” 20” 23”
Oversize   12.5”    6.75” 8” 21.5” 23”

Additional information

Weight N/A
Dimensions N/A
Size

COB, HORSE, PONY, OVERSIZE, MINI-MEDIUM

28 reviews for Halter for ThinLine Grazing Muzzle

  1. Mary L. (verified owner)

    Haven’t used the halter yet – waiting for the muzzle to arrive. However, the halter came so quickly and it looks like it’s well made and I’m glad I decided to buy it, as I think my horse will be very comfortable with his new “dedicated” halter. Was very pleased with the service Hayburners provided. Thank you.

    (0) (0)
  2. Blane T. (verified owner)

    A simple well built halter. Definitely recommend this because of the slots for the straps of the muzzle

    (0) (0)
  3. Mary H. (verified owner)

    Nice halter week made.

    (0) (0)
  4. SHARON M. (verified owner)

    The muzzle attached easily with the tie-wrap placements and the overall construction of the halter is fine, however, when my horses rolled, the buckle came undone and the halter fell off. Fortunately I was home and saw it happen, if not the horse could have been grazing free for quite a while, not good.

    (0) (0)
  5. Sharon Worona (verified owner)

    Works well. Love how the zip ties are on the outside of the halter.

    (0) (0)
  6. Carol Cutler (verified owner)

    Having buckles on each side makes adjustment much easier. The pockets for the zip ties are ingenious. It is well made and works perfectly with the muzzle.

    (0) (0)
  7. Anonymous (verified owner)

    The halter runs large had to purchase a size smaller. Wish the halter had a clip for throat latch for easy removal.

    (1) (0)
  8. Anonymous (verified owner)

    I love how this halter works with the muzzle. There are the “pockets” within the halter to attach the muzzle with zip ties. Therefore, the zip ties never touch sensitive noses. Great idea.

    (0) (0)
  9. Karen (verified owner)

    It is convenient the halter has “built in” slits to use when attaching the Flexible Filly gazing muzzle, I just with there was a clip on the throat latch to make it easier to put the halter on. It’s a little awkward to hold the halter strap, raise the grazing muzzle and try not to lose the treat inside — only seems fair to give the horse a treat if they are going to wear the muzzle all day.

    (1) (0)
  10. Elaine Thousand (verified owner)

    I realize that it’s possible to use the muzzle with any halter, however I didn’t find it very easy to fit until I tried this halter with the muzzle. Because the halter is designed to work with the muzzle, the muzzle hangs straight and it’s much easier to adjust the muzzle properly. The halter is worth getting! My horse has only worn the muzzle/halter combo a couple days, so I can’t say how it will hold up over time.

    (0) (0)
  11. Julienne M. (verified owner)

    Reading the comments and how they were oversized, I went for the medium mini for my small pony (12hh welsh cob X). That was too small on his blockier face, so I exchanged for the pony size (the exchange went very smoothly through hayburners). The pony size was a bit too long (pony was running around dangling the muzzle around his throat), so I had to punch a few holes in the leather crown piece to tighten up for my Houdini. That worked great and he’s now an (un)happy grazing camper.

    (0) (0)
  12. Anonymous (verified owner)

    The halter has held up really well, and our horse has not been able to get it off or break it!

    (0) (0)
  13. Mattie C. (verified owner)

    Comfortable fit and breakaway crown. Great to use with the Flexible Filly muzzle.

    (0) (0)
  14. Stephanie (verified owner)

    Very lightweight and durable, doesn’t seem to bother my mare at all!

    (0) (0)
  15. Rodney (verified owner)

    They still tended to run on the horses noses and face requiring addition of fleece around the halter.

    (0) (0)
  16. SUZANNE R. (verified owner)

    Terrific customer service and quality products. Hay Burners features products not found elsewhere and backs them with great advice and customer service. Very happy to have done business with them and will do business with them again!

    (0) (0)
  17. Kathleen Landin (verified owner)

    I purchased the cob size for my 15.2h horse and it fits good! I am happy with this halter and glad to know if it breaks, I can get replacement parts.

    (0) (0)
  18. Anonymous (verified owner)

    The only reason I knocked off a star is that the noseband isn’t adjustable. I need a smaller noseband on the cob size so that my mare doesn’t eat from the sides of the muzzle. A friend showed me a way to compensate by pulling two back fins forward to the side rings and it’s working well!!

    (1) (0)
  19. Sharon S. (verified owner)

    Great grazing muzzle. Ponies don’t seem to mind them at all.

    (0) (0)
  20. Mary Hall (verified owner)

    Would be nice if halter was softer but with padding it works fine.

    (0) (0)
  21. Jill (verified owner)

    not safe if your horse wants to get the muzzle off. not break away and couldnt really see where the ties go. i returned it and they were quite good about getting my $ back to me

    (0) (0)
    • laurie (store manager)

      Sorry you were not satisfied with the ThinLine halter. The leather crown is the breakaway feature. The slots for the tie wraps can be a challenge to see, I had trouble finding them at first too and it can be a bit frustrating

  22. Cheryl (verified owner)

    Definitely go with the smaller size for the halter. Not adjustable around the nose. Well made -I like it.

    (0) (0)
  23. Ann G. (verified owner)

    The halter is of good quality and is custom-made to fit with the other Flexible Filly parts—muzzle and padding.

    (0) (0)
  24. Iva Peele (verified owner)

    This is excellent and with the pads and the filly grazing muzzle my little mate is doing very well. No rubs and perfect fit.

    (0) (0)
  25. Alison (verified owner)

    I like the adjustability of the halter. It actually fits my donkeys head well.

    (0) (0)
  26. Marianne (verified owner)

    Pricey for what it is, but I bought it to insure the muzzle would function the way it was designed to.

    (0) (0)
  27. SUZANNE R. (verified owner)

    The BEST grazing muzzles/halters out there. My horses have no problem wearing them and I have no problem keeping the muzzles clean – quick rinse with a hose does it and they are dry by the next morning!

    (0) (0)
  28. Laura C. (verified owner)

    I returned this item due to it being too large (my mistake) The quality was good, just run very large.

    (0) (0)

Only logged in customers who have purchased this product may leave a review.